-57%

ERYONE ABS LIKE RESIN 500G

€22,99 €9,99

colour: red orange

  • White
  • red orange
  • Transparent
  • Transparent blue
  • Black
  • Transparent red
  • Transparent green
Out of stock

Notify me when this product is available:

visaamerican expressmastergoogle paypaypalshopify payapple pay

    Excellent Toughness: ABS-like resin retains most of the mechanical properties of ABS plastic, with excellent tensile strength, flexural strength, and It's perfect for any resin print that needs to be resilient.


    High-speed curing: ABS-like resin curing is very fast, molding strength is good.


    High Precision and Low Shrinkage: ABS-like resin is designed to reduce volumetric shrinkage during the photo-curing process, which ensures the high precision of the printing model with smooth surfaces.


    Stable performance and high hardness: color paste hardly separates from resin. ABS-like resin has high hardness.


    High Compatibility: Eryone ABS-like resin is compatible with most LCD/DLP 3D printers with wavelength of 395~405nm.

    Basic parameters

    ABS-Like Resin

    parameter

    Unit

    GK-10D 2MIN clear

    GK-20D 2MIN white

    GK-60D 2MIN grey

    Maximum power

    (kgf)± 10%

    181.72

    149.96

    137.68

    tensile strenght

    (MPa)± 10%

    42,838

    35,351

    32,456

    yield point elongation

    (%)± 10%

    6.106

    6,679

    6,031

    elongation at break

    (%)± 10%

    22,819

    44,892

    41.103

    draw resistance

    (MPa)± 10%

    531.51

    413,043

    400,588

    bending stress

    (MPa)± 10%

    45,969

    33,662

    30,405

    bending mode

    (MPa)± 10%

    1007,944

    719,229

    682,588

    impact strength

    ï¼?span>j/m)Â?span>10%

    126.2

    217.4

    195.36

    viscosity

    MPa�span>s

    27.8° C 266.5

    27.6° C 337.5

    26° C 251.0

    hardness

    Shore D

    80-83

    80-83

    80-83

    specific gravity

    g/cc

    1.05�span>1.25

    1.05�span>1.25

    1.05�span>1.25

    Applicable wavelength

    nm

    395-405

    395-405

    395-405


     

    Print Recommended setting

    Recommended setting of ABS-like resin (25â"?

    Type

    Layer Thickness
    ï¼?span>mmï¼?/p>

    exposure

    time

    ï¼?span>sï¼?/p>

    exposure

    times

    Bottom

    layers

    ï¼?span>sï¼?/p>

    The number of bottom layers

    lifting distance
    ï¼?span>mmï¼?/p>

    lifting speed
    ï¼?span>mm/min)

    Type

    AnyCubic Photon

    0.05

    8th

    100

    5

    5

    100

    Chromatic color display

    AnyCubic Photon-S

    0.05

    8th

    100

    5

    5

    100

    Longer 3D Orange10

    0.05

    10

    100

    6

    5

    150

    Longer 3D Orange30

    0.05

    10

    100

    6

    5

    150

    CREALITY LD-002R

    0.05

    8th

    80

    10

    5

    100

    Nova3D Bene4

    0.05

    5

    50

    5

    5

    150

    Nova3D Elfin2

    0.05

    10

    100

    6

    5

    150

    ELEGOO MARS

    0.05

    15

    80

    5

    5

    100

    ELEGOO MARS PRO

    0.05

    7

    60

    5

    5

    100

    Voxelab Polaris

    0.05

    10

    90

    6

    5

    100

    grade

    1.The red-orange resin exposure time should be 3s longer than the above recommended exposure time. The exposure time of the lower resin layer should be 30 seconds longer than the corresponding recommended parameters (see above).

    2.When the ambient temperature is less than 20â"?span>, the exposure time and the lower layer exposure time should be greater than the respective recommended parameters. The lower the temperature, the longer the exposure time can be.

    3. when we use clear resin to print objects, we need to shorten the exposure time and adjust the angle of placement when additional parts harden.

    Voxelab Proxima

    0.05

    3

    30

    6

    5

    100

    Monochrome display

    Phrozen Transform

    0.05

    10

    80

    20

    8th

    100

    Phrozen Sonic Mini

    0.05

    2.5

    25

    6

    5

    100

    CREALITY LD-002H

    0.05

    3

    25

    7

    5

    100

    AnyCubic Photon Mono SE

    0.05

    2.5

    40

    6

    6

    200

    AnyCubic Photon Mono

    0.05

    3

    40

    6

    6

    200

    AnyCubic Photon Mono X

    0.05

    4.5

    45

    6

    8th

    200

    ELEGOO SATURN

    0.05

    3

    30

    5

    7

    100

    ELEGOO MARS 2

    0.05

    3

    35

    5

    5

    100

    ELEGOO MARS 2 PRO

    0.05

    3

    25

    5

    5

    100

    Nova3D Elfin2 Mono SE

    0.05

    3

    30

    6

    5

    150

    grade

    1.Red-orange resin exposure time should be 1.5s longer than above recommended exposure time. The exposure time of the lower resin layer should be 15 seconds longer than the corresponding recommended parameters (see above).

    2. When the ambient temperature is less than 20â"?span>, the exposure time and the lower layer exposure time should be greater than the respective recommended parameters. The lower the temperature, the longer the exposure time can be.

    3 When we use clear resin to print objects, we need to shorten the exposure time and adjust the angle of placement when additional parts harden.

    FAQ

    1.Q: The surface of the print will become whiter after secondary curing?

    A: The cause is that the surface of the resin is not thoroughly cleaned.

    2.Q: There is a crack in the model, why?

    A:There are residual resin or a mixture of resin and alcohol, and the inner and outer shrinkage of the model is uneven. There are resin residues or a mixture of resin and alcohol, and the internal and external shrinkage of the model is uneven.

    Expansion cracks: the inside is hollow, and air drying is not complete after cleaning. The resin absorbs water, expands and cracks.

    3.Q: The bottom plate warped when printing?

    A: The curing time of the bottom layer is insufficient, resulting in poor adhesion between the model and the build platform.

    4.Q: The clear resin is yellowing, why?

    A: Slight yellowing of rigid, transparent resin is normal and can be reduced by reducing exposure time or post-cure time.

    5.Q: If the resin is not used for a long time, will delamination occur?

    A: The resin formula contains color paste that will precipitate and peel off over time. If the color paste still precipitates after stirring, the resin is no longer usable.

    6.Q: Why wasn't my red-orange resin printed?

    A: The red-orange resin exposure time should be 3s longer than the recommended exposure time in the table. The exposure time of the lower resin layer should be 30 seconds longer than the corresponding recommended parameters in the table.

    7.Q: I couldn't print and curing was bad, but I printed according to the recommended parameter table?

    A: When the ambient temperature is less than 20â"?span>, the exposure time and the lower layer exposure time should be greater than the respective recommended parameters. The lower the temperature, the longer the exposure time can be.

    8.Q: Why does my clear resin print have some extra and unnecessary parts? How can I eliminate these?

    A: When using clear resin to print objects, we need to shorten the exposure time and adjust the angle of placement when additional parts harden.

    9.Q: How long does post-curing take?

    A: It depends on the energy density in the curing box. e.g. LED secondary curing box with energy density 200mw/cm2 and waveband 405 needs rotating LED secondary curing box with energy density 200mW/cm2 and waveband 405 for example needs 2 minutes rotation curing (rotating the print to solidify different surfaces ). The curing boxes available on the market require 20-30 minutes of curing time due to their low energy density.

      Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
      January,February,March,April,May,June,July,August,September,October,November,December
      Not enough items available. Only [max] left.
      Add to WishlistBrowse WishlistRemove Wishlist
      Shopping cart

      Your cart is empty.

      Return To Shop

      Add Order Note Edit Order Note
      Estimate Shipping
      Add A Coupon

      Estimate Shipping

      Add A Coupon

      Coupon code will work on checkout page

      English

      Select your language

      EUR

      Select your currency

      ERYONE ABS LIKE RESIN 500G

      red orange
      red orange
      €22,99 €9,99