Filament for impressive 3D ERYONE PLA+, dimensional precision +/- 0.05 mm 1kg (2.2LBS)/Pool, 1.75mm


colour: Black

  • Black
  • White
  • Blue
  • editor
  • Gray
  • Orange
  • Green
  • Skin
  • Yellow
  • Army green
  • Cool white
  • Ivory white
  • Olive green
  • High Speed-Orange
  • High Speed-Purple
  • High Speed-Black
  • High Speed-White
  • High speed-gray
  • High speed-red
  • High speed-green
  • High Speed-Blue
  • High Speed-Ivory
  • High speed-yellow
  • High Speed-Magenta
  • High Speed-Azure Blue
Out of stock

visaamerican expressmastergoogle paypaypalshopify payapple pay

ERYONE PLA+ 3D Printer Filament, Reviewed by John Aldred


  • Respect of the environment, sans odeur, non toxic.
  • Haute intensity, color live and claire.
  • Soft pourcentage de rétrécissement et peu de hairstyle.
  • Convient à 99% of the impressive 3D FDM les plus utilisées.


  • Filament Diameter: 1.75mm
  • Tolerance: ±0.03mm
  • Printing temperature: 190°C-220°C
  • Heated bed temperature: 55-70°C
  • Printing Speed: 30-100mm/s



1.Q: Can PLA be used to print tableware?

A: Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toner is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.

2.Q: The nozzle is clogged by PLA, and how can I solve it?

A: Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.

3.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it?

A: Too high temperature makes the PLA filament melt and flow so almost. Please turn the temperature down to a proper value.

The retracting parameters are improper, so adjust the retracting length and speed.

4.Q: There are too much melted filament around the nozzle. What should I do?

A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn't match with the extrusion output.

5.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?

A: Normally, the PLA filament in the printing process will not snap by itself. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.

6.Q: The surface of my print isn't very smooth, and the extruded filament has inconstant diameters. Why?

A: The printing temperature is too high or too low. The temperature doesn't match well with the printing speed. You need to adjust the printing speed or temperature.

7.Q: Why my PLA-printed objects don't stick to the heated bed? How do I solve?

A: The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and it's clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page


Select your language


Select your currency

Filament for impressive 3D ERYONE PLA+, dimensional precision +/- 0.05 mm 1kg (2.2LBS)/Pool, 1.75mm