Sold out

Give filament to other 3D printers for their birthday.

130,00 zł

Notify me when this product is available:

visaamerican expressmastergoogle paypaypalshopify payapple pay


Rainbow Lagoon Filament gives a multicolored rainbow effect

Rainbow Lagoon Filament, it starts with a silver base color that combines with green, blue, purple, red and yellow to give you the feeling of surfing a lagoon. Perfect for craft projects.

(Large Model, Lagoonbow Beauty) As per color around 13-15m, larger size print will show more of Lagoonbow's amazing color change. Due to the nature of the filament, the prints may only remain one color,

Professional packaging, vacuum sealed] +/-0.05mm tolerance . Low deformation to ensure smooth feeding and stable prints, no clogging, extremely high pass rate. 100% natural materials, biodegradable and environmentally friendly, not harmful to users and the environment. Ideal for indoor printing. Professional packaging by a sealed vacuum bag with desiccant pack (please keep the product is available in a wide range of sizes and dimensions.

[High Compatibility] Compatible with 3D printers that use 1.75MM filament, such as: Prusa, Makerbot, etc. Our filaments have been tested on different brands of 3D printers in the market. Our filaments have been tested on various 3D printers on the market.


  • Diameter: 1.75mm
  • Tolerance: ±0.05mm
  • Printing temperature: 190-220â"?
  • Recommended print speed: 30-60mm/s


1.Q:The printed model is single color, why?

A: The length of the PLA rainbow in each color is constant, and the customer calculates the length or weight of the filaments needed to print the model according to the length of the PLA rainbow in each color is constant, and the Customer calculates the length or weight of filaments needed to print the model depending on how many colors the customer wants to show when cutting.

2.Q: The color of a printed object is different from the color of the filament itself, why?

A: Due to the process and objective chemical changes, some rainbow thread colors will have a coating effect; That is, the outer surface is one color and the inner surface is another color.

3.Q: Why are my threads getting tangled? How can I solve the problem?

A: Thread tangle is not caused by disordered or imperfect winding. When making filament, the filament winds back and forth (left to right and then right to left). A common cause of tangles is that the end of the filament is not secured in the holes of the spool. So customers need to attach the filament end to the correct holes of the spool.

4.Q: Can PLA be used for tableware printing?

A: Not recommended: PLA is a degradable, food-safe raw material, but the PLA with toner is not food-safe.

5.Q: The nozzle is clogged with PLA, how can I solve the problem?

A: Inconstant filament diameter, lower nozzle temperature and frequent replacement with other filaments lead to this problem. Before you start, please clean the nozzle and adjust the temperature to a reasonable value.

6.Q: My prints have web-like threads (stringing). How can I fix the problem?

A: Too high a temperature will melt the PLA filament, causing it to flow quickly.

The feed parameters are not correct, so adjust the feed length and speed.

7.Q: There are too many melted threads around the nozzle?

A: This problem can be traced back to too high temperature, too low print speed and nozzle diameter mismatch in the slice software. with the extrusion performance.

8.Q: The PLA filament was perfect when I opened the package. After printing intermittently several times, my PLA filament accidentally breaks during printing. Why?

A: Normally, the PLA filament will not break by itself during the printing process. However, the degradable material PLA will become more brittle and easy to break after exposure to moisture, so you should pay attention to the moisture resistance.

9.Q: The surface of my print is not very smooth and the extruded filament has inconstant diameters.

A: The printing temperature is too high or too low. The temperature does not match the print speed. You need to adjust the print speed or temperature.

10.Q: Why won't my PLA printed objects stick to the heatbed? How can I solve the problem?

A: The distance between the nozzle and the bed is too big. Make sure your heated bed is level and clean. Then judge whether the printing temperature and heatbed temperature are too low, and our customers should adjust them to the right range.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page


Select your language


Select your currency