Excellent Toughness: ABS-like resin retains most of the mechanical properties of ABS plastic, with excellent tensile strength, flexural strength, and It's perfect for any resin print that needs to be resilient.
High-speed curing: ABS-like resin curing is very fast, molding strength is good.
High Precision and Low Shrinkage: ABS-like resin is designed to reduce volumetric shrinkage during the photo-curing process, which ensures the high precision of the printing model with smooth surfaces.
Stable performance and high hardness: color paste hardly separates from resin. ABS-like resin has high hardness.
High Compatibility: Eryone ABS-like resin is compatible with most LCD/DLP 3D printers with wavelength of 395~405nm.
Basic parameters
ABS-Like Resin | ||||
parameter |
Unit |
GK-10D 2MIN clear |
GK-20D 2MIN white |
GK-60D 2MIN grey |
Maximum power |
(kgf)± 10% |
181.72 |
149.96 |
137.68 |
tensile strenght |
(MPa)± 10% |
42,838 |
35,351 |
32,456 |
yield point elongation |
(%)± 10% |
6.106 |
6,679 |
6,031 |
elongation at break |
(%)± 10% |
22,819 |
44,892 |
41.103 |
draw resistance |
(MPa)± 10% |
531.51 |
413,043 |
400,588 |
bending stress |
(MPa)± 10% |
45,969 |
33,662 |
30,405 |
bending mode |
(MPa)± 10% |
1007,944 |
719,229 |
682,588 |
impact strength |
ï¼?span>j/m）Â?span>10% |
126.2 |
217.4 |
195.36 |
viscosity |
MPa�span>s |
27.8° C 266.5 |
27.6° C 337.5 |
26° C 251.0 |
hardness |
Shore D |
80-83 |
80-83 |
80-83 |
specific gravity |
g/cc |
1.05�span>1.25 |
1.05�span>1.25 |
1.05�span>1.25 |
Applicable wavelength |
nm |
395-405 |
395-405 |
395-405 |
Print Recommended setting
Recommended setting of ABS-like resin (25â"? | |||||||
Type |
Layer Thickness |
exposure time ï¼?span>sï¼?/p> |
exposure times Bottom layers ï¼?span>sï¼?/p> |
The number of bottom layers |
lifting distance |
lifting speed |
Type |
AnyCubic Photon |
0.05 |
8th |
100 |
5 |
5 |
100 |
Chromatic color display |
AnyCubic Photon-S |
0.05 |
8th |
100 |
5 |
5 |
100 |
|
Longer 3D Orange10 |
0.05 |
10 |
100 |
6 |
5 |
150 |
|
Longer 3D Orange30 |
0.05 |
10 |
100 |
6 | 5 |
150 |
|
CREALITY LD-002R |
0.05 |
8th |
80 |
10 |
5 |
100 |
|
Nova3D Bene4 |
0.05 |
5 |
50 |
5 |
5 |
150 |
|
Nova3D Elfin2 |
0.05 |
10 |
100 |
6 |
5 |
150 |
|
ELEGOO MARS |
0.05 |
15 |
80 |
5 |
5 |
100 |
|
ELEGOO MARS PRO |
0.05 |
7 |
60 |
5 |
5 |
100 |
|
Voxelab Polaris |
0.05 |
10 |
90 |
6 |
5 |
100 |
|
grade |
1.The red-orange resin exposure time should be 3s longer than the above recommended exposure time. The exposure time of the lower resin layer should be 30 seconds longer than the corresponding recommended parameters (see above). |
||||||
Voxelab Proxima |
0.05 |
3 |
30 |
6 |
5 |
100 |
Monochrome display |
Phrozen Transform |
0.05 |
10 |
80 |
20 |
8th |
100 |
|
Phrozen Sonic Mini |
0.05 |
2.5 |
25 |
6 |
5 |
100 |
|
CREALITY LD-002H |
0.05 |
3 |
25 |
7 |
5 |
100 |
|
AnyCubic Photon Mono SE |
0.05 |
2.5 |
40 |
6 |
6 |
200 |
|
AnyCubic Photon Mono |
0.05 |
3 |
40 |
6 |
6 |
200 |
|
AnyCubic Photon Mono X |
0.05 |
4.5 |
45 |
6 |
8th |
200 |
|
ELEGOO SATURN |
0.05 |
3 |
30 |
5 |
7 |
100 |
|
ELEGOO MARS 2 |
0.05 |
3 |
35 |
5 |
5 |
100 |
|
ELEGOO MARS 2 PRO |
0.05 |
3 |
25 |
5 |
5 |
100 |
|
Nova3D Elfin2 Mono SE |
0.05 |
3 |
30 |
6 |
5 |
150 |
|
grade |
1.Red-orange resin exposure time should be 1.5s longer than above recommended exposure time. The exposure time of the lower resin layer should be 15 seconds longer than the corresponding recommended parameters (see above). |
||||||
FAQ
1.Q: The surface of the print will become whiter after secondary curing？
A: The cause is that the surface of the resin is not thoroughly cleaned.
2.Q: There is a crack in the model, why?
A:There are residual resin or a mixture of resin and alcohol, and the inner and outer shrinkage of the model is uneven. There are resin residues or a mixture of resin and alcohol, and the internal and external shrinkage of the model is uneven.
Expansion cracks: the inside is hollow, and air drying is not complete after cleaning. The resin absorbs water, expands and cracks.
3.Q: The bottom plate warped when printing？
A: The curing time of the bottom layer is insufficient, resulting in poor adhesion between the model and the build platform.
4.Q: The clear resin is yellowing, why?
A: Slight yellowing of rigid, transparent resin is normal and can be reduced by reducing exposure time or post-cure time.
5.Q: If the resin is not used for a long time, will delamination occur？
A: The resin formula contains color paste that will precipitate and peel off over time. If the color paste still precipitates after stirring, the resin is no longer usable.
6.Q: Why wasn't my red-orange resin printed?
A: The red-orange resin exposure time should be 3s longer than the recommended exposure time in the table. The exposure time of the lower resin layer should be 30 seconds longer than the corresponding recommended parameters in the table.
7.Q: I couldn't print and curing was bad, but I printed according to the recommended parameter table？
A: When the ambient temperature is less than 20â"?span>, the exposure time and the lower layer exposure time should be greater than the respective recommended parameters. The lower the temperature, the longer the exposure time can be.
8.Q: Why does my clear resin print have some extra and unnecessary parts? How can I eliminate these?
A: When using clear resin to print objects, we need to shorten the exposure time and adjust the angle of placement when additional parts harden.
9.Q: How long does post-curing take?
A: It depends on the energy density in the curing box. e.g. LED secondary curing box with energy density 200mw/cm2 and waveband 405 needs rotating LED secondary curing box with energy density 200mW/cm2 and waveband 405 for example needs 2 minutes rotation curing (rotating the print to solidify different surfaces ). The curing boxes available on the market require 20-30 minutes of curing time due to their low energy density.
