ERYONE Wood PLA Filament 1.75mm for FDM 3D Printer, -0.03mm, 1kg

€32,99

colour: Red

  • Red
  • Pine wood
  • Clay
  • Charcoal ash
  • Light
  • Deep
Out of stock

visaamerican expressmastergoogle paypaypalshopify payapple pay

Feature:

  • Similar to the color of Burlywood.
  • With wood-like texture, wood fiber.

Specifications:

  • Filament Diameter: 1.75mm
  • Tolerance: ±0.03mm
  • Printing temperature: 190°C-220°C
  • Heated bed temperature: 55-70°C
  • Printing speed: 30-60mm/s

Store window:

FAQ

  1. Q:How to solve nozzle wear?

A: Woody PLA contains wood powder and wood fibers. With long-term use, nozzles with lower hardness, such as B. Brass nozzles, wear out easily, which affects the pressure. It is recommended to use higher hardness nozzles.

2.Q: How to fix the blockage caused by the high temperature printing?

A: Woody PLA contains wood powder. If the printing temperature exceeds 225℃, the PLA is likely to be charred and cause clogging. It is recommended to print at a low temperature of 190-210℃.

3.Q: Why are my threads getting tangled? How can I solve it?

A: Thread knotting is not caused by disorderly or imperfect winding. When making filament, the filament is wound back and forth (left to right and then right to left). Usually there is no knotting of the thread. A common cause of tangles is that the filament end is not fixed in the holes of the spool. The knotting by overlapping or the changed winding direction leads to a knotting of the filament. Therefore, customers need to attach the thread end to the correct holes of the bobbin.

4.Q: Can PLA be used for tableware printing?

A: Not recommended. Although PLA is a degradable, food-safe raw material, the PLA with toughener is not food-safe. If you really want to print on a tableware, you should use transparent PLA.

5.Q: The nozzle is clogged with PLA, how can I solve the problem?

A: An inconstant filament diameter, a nozzle temperature that is too low and frequent replacement with other filaments lead to this problem. So clean the nozzle before you start and adjust the temperature to a reasonable level.

6.Q: My prints have problems with web-like threads (stringing). How can I fix the problem?

A: If the temperature is too high, the PLA filament will melt and flow so quickly. Please turn down the temperature to a reasonable level.

The feed parameters are not correct, so adjust the feed length and speed.

7.Q: There is too much melted filament around the nozzle. What should I do?

A: This issue can be traced back to too high temperature, too low print speed, and nozzle diameter mismatch in slice software with extrusion performance.

8.Q: The PLA filament was perfect when I opened the package. After printing several times intermittently, my PLA filament accidentally breaks during printing. Why?

A: Normally, PLA filament does not break by itself during the printing process. However, being a degradable material, PLA becomes more brittle and breaks easily after exposure to moisture, so you should pay attention to moisture protection.

9.Q: The surface of my print is not very smooth and the extruded filament has inconstant diameters. Why is that?

A: The printing temperature is too high or too low. The temperature does not match the print speed. You need to adjust the print speed or temperature.

10.Q: Why won't my PLA printed objects stick to the heatbed? How can I solve this?

A: The distance between the nozzle and the bed is too big. Make sure your heatbed is level and clean. Then judge whether the printing temperature and heatbed temperature are too low, and our customers should adjust them to the right range.

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Estimate Shipping
Add A Coupon

Estimate Shipping

Add A Coupon

Coupon code will work on checkout page

English

Select your language

EUR

Select your currency

ERYONE Wood PLA Filament 1.75mm for FDM 3D Printer, -0.03mm, 1kg

Red
Red
€32,99