ERYONE PETG Filament, 1.75mm ±0.03mm Filament for 3D Printer, 1KG(2.2LBS)/ Spool

229,00 kr

colour: Carbon fibre - black

  • Carbon fibre - black
  • Black
  • White
  • orange
  • Transparent red
  • Gray
  • Blue
  • Yellow
  • editor
  • Transparent
  • Transparent blue
  • Carbon fibre - dark gray
  • Carbon fibre - olive green
  • Carbon fibre - blue
  • Carbon fibre - Purple red
  • High speed-transparent red
  • High speed-transparent blue
  • High speed-transparent
  • High Speed-Gray
  • High Speed-Yellow
  • High speed-Red
  • High Speed-Black
  • High speed-White
  • High Speed-Orange
  • High Speed-Blue
229,00 kr
Out of stock

visaamerican expressmastergoogle paypaypalshopify payapple pay

PETG Review by Michele Dicati

ERYONE - Tutti i Test del filamento PLA + e PETG


Feature:

  • Higher toughness than PLA.
  • Higher hardness than PLA.
  • Impact resistance is more than 30 times that of standard PLA.
  • Elongation at break is more than 50 times that of standard PLA.
  • The adhesive strength is stronger than that of PLA.

Specifications:

  • Filament Diameter: 1.75mm
  • Tolerance: ±0.03mm
  • Printing temperature: 230°C-250°C
  • Heated bed temperature: 70-85°C
  • Printing speed: 30-80mm/s

    showcase:

    FAQ

    1.Q: Why are my threads getting tangled? How can I solve it?

    A: Thread knotting is not caused by disorderly or imperfect winding. When making filament, the filament is wound back and forth (left to right and then right to left). Usually there is no knotting of the thread. A common cause of tangles is that the filament end is not fixed in the holes of the spool. The knotting by overlapping or the changed winding direction leads to a knotting of the filament. Therefore, customers need to attach the thread end to the correct holes of the bobbin.

    1. Q: Is PETG biodegradable?

    A: The natural degradation process of PETG raw materials is very long, and PETG is a non-degradable material. PETG is a thermoplastic material that can be used for secondary plastic recycling. PETG is also an environmentally friendly material.

    3.Q: The nozzle is clogged by PETG, how can I solve the problem?

    A: An inconstant filament diameter, a nozzle temperature that is too low and frequent replacement with other filaments lead to this problem. So clean the nozzle before you start and adjust the temperature to a reasonable level.

    4.Q: My prints have problems with web-like threads (stringing). How can I fix the problem?

    A: If the temperature is too high, the PETG filament will melt and flow so quickly. Please turn down the temperature to a reasonable level.

    The feed parameters are not correct, so adjust the feed length and speed.

    5.Q: There is too much melted filament around the nozzle. What should I do?

    A: This issue can be traced back to too high temperature, too low print speed, and nozzle diameter mismatch in slice software with extrusion performance.

    6.Q: The PETG filament was perfect when I opened the package. After printing several times intermittently, my PETG filament accidentally breaks during printing. Why?

    A: Normally, the PETG filament will not break by itself during the printing process. However, the degradable material PETG will become more brittle and easy to break after exposure to moisture, so you should pay attention to moisture protection.

    7.Q: The surface of my print is not very smooth and the extruded filament has inconstant diameters. Why is that?

    A: The printing temperature is too high or too low. The temperature does not match the print speed. You need to adjust the print speed or temperature.

    8.Q: Why my PETG printed objects won't stick to the heatbed? How can I solve this?

    A: The distance between the nozzle and the bed is too big. Make sure the heated bed is level and clean. Then judge whether the printing temperature and heatbed temperature are too low, and our customers should adjust them to the right range.

    Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
    January,February,March,April,May,June,July,August,September,October,November,December
    Not enough items available. Only [max] left.
    Add to WishlistBrowse WishlistRemove Wishlist
    Shopping cart

    Your cart is empty.

    Return To Shop

    Add Order Note Edit Order Note
    Estimate Shipping
    Add A Coupon

    Estimate Shipping

    Add A Coupon

    Coupon code will work on checkout page

    English

    Select your language

    DKK

    Select your currency

    ERYONE PETG Filament, 1.75mm ±0.03mm Filament for 3D Printer, 1KG(2.2LBS)/ Spool

    Carbon fibre - black
    Carbon fibre - black
    229,00 kr